Ipac 2 illuminated arcade kit.
- Related Products
Ipac2 illuminated Arcade Kit
NEW 2015 Model
Everything you need to start your MAME Project.
Minimum hole size: 24mm - 28mm.
For 24mm hole size the use of the spacer is required - This will raise the button 6mm from the surface.
For 28mm hole no spacer is required. - This will leave the buttons lip flush with the surface and is the prefered method of fixing for a cleaner finish.
For a guide on how to wire these buttons please visit the "how to guides"
Microswitch connection: Jamma standard 4.8mm female crimp required.
Illuminated 12v connection: 6.3mm female crimp required.
2 x Arcade Joysticks.
2 x illuminated P1/P2 Start Buttons
12 x illuminated Action Buttons.
4 x Black concave action Buttons
4 x PCB Feet
30 x Ready crimped 4.8mm wires ( 1m Length )
1 x Ground Wire (4.8mm)
1 x Ipac2 Interface (Keyboard encoder)
1 x Ipac2 USB Lead
1 x illuminated wiring kit containing the following:
3 metres of red wire
2 metres of black wire
1 daisy chained ground wire (6.3mm for 12v- on the LED bulb holder)
14 x 6.3mm female crimps ( for 12v+ on the LED bulb holder)
More than enough wires to set up a two player mame control panel.
30 x Ready crimped wires with 4.8mm female connectors for use with standard buttons and Joysticks
Each wire is 1 metre (1000mm) in length.
1 x Daisy chained ground wire with 30 connections of 4.8mm size.
Distance between each connection is 140mm - Total Stretched length is 3m.
Write an online review and share your thoughts with other shoppers!
Reviewer: Retroboi from Newcastle
Bought this set because I wanted the buttons to light up rather than the normal concave type. Excellent little bit of kit and at a good price too, my old arcade machine looks like new, well happy.